Karriere

Automation Engineer

Responsibilities:

• Responsible creating and maintaining control program for manufacturing equipment
• Responsible for writing and developing a program based on customer and management requirements
• Responsible on utilizing hardware and developing software to control and improve the efficiency of manufacturing equipment.

Requirements:

• Diploma/Advanced Diploma or Degree in Computer Science/Information Technology or equivalent.
• At least 1 year of working experience in the related field is required for this position.
• Fresh graduates are also encouraged to apply.
• Familiar with VB.Net, SQL Server, Control Programming
• Applicants must be willing to travel & work in Bayan Lepas.
• Preferably Junior Executives specializing in IT/Computer – Software or equivalent.

Control Engineer

Main Responsibilities

• Design electrical schematic diagram for automation machine.
• Create electrical panel layout, cable routing layout, etc.
• Generate bill of materials or select electrical components that need to purchase for the machine.
• Communicate with team on machines specification and component selection.
• Coordinate with assembly team to provide guidance in electrical/ wiring whenever necessary.
• Write machine manuals, setup procedures and machine checklist.
• Onsite service and troubleshooting should there be need arises.
• Other duties and assignments as instructed by superiors.

Requirements:

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Engineering (Electrical/Electronic/ Mechatronics) or equivalent.
• Required skill(s): Autodesk, AutoCad and MS Office.
• Knowledge in servo motor, robot and PLC programming would be an added advantage.
• Fresh graduates are welcome to apply.

Drafter / Designer

Job Objective:

• Document/ drawing control.
• To ensure final product design/ drawing comply with regulation and quality standard.

Responsibilities:

• To create products/ components drawing.
• To assist products designer.

Requirements:

• Minimum 3 years & above working experience as drafter/ designer or in similar role.
• Hands-on experience with computer-aided design software.

Facility Technician / Technician

• Ensure all the company’s facilities are in good condition and well maintained
• Coordinate and carry out overall plant maintenance and housekeeping
• Ensure all facility equipment and machines are well maintained as per procedures
• Establish a systematic Preventive Maintenance program and procedures for implementation with the ISO requirement
• Minimize equipment downtime
• Coordinate and supervise contractor work on maintaining, servicing, housekeeping and constructions work in the premises
• Ensure all contractors follow the safe work practice
• Ensure the company complies with all local authority rules & regulations such as BOMBA, JKKP, MBPP, Tenaga Nasional and Safety and Health (DOSH) Department
• Ensure all equipment installations including schedule wastes disposals are according to the local authority Environmental Act
• Keeps fire equipment, alarms, switches, and sensors in good working condition
• To carry out the duties as a committee member for OSH and ERT
• Carry out project as assigned by the company from time to time

Firmware Engineer

Responsibilities

• Responsible for Firmware / Embedded Software Architecture.
• Conduct Feasibility Study, Design, Implementation, Testing & Maintenance.
• Develop & test new ideas for product improvement.
• Actively participate in cross-functional teams to develop hardware modules as well as address design issue or maintenance of existing hardware modules.
• Analyse & enhance efficiency, stability & scalability of system resources.
• Evaluate, test & review designs to ensure program perform according to requirements & specifications.
• Contribute in continuous improvement across all hardware.

Requirements:

• Bachelor Degree in Electrical/Electronics/Computer Engineering.
• Min 1 year working experience on embedded software and application development.
• Experience architecting firmware, hardware & software interface.
• Good technical & analytical skill with ability to perform electronic system debug effectively.
• Proficient in C programming.
• Advance level knowledge on RTOS and embedded system architecture.
• Understanding on communication transport protocol such as SPI, I2C, UART, USB, Ethenet.
• Full-Time position(s) available.
• Fresh graduate are encourage to apply.

Hardware Design Engineer

MAIN RESPONSIBILITIES AND DUTIES

• Conducting market research to identify customer needs and trends for ATE including advanced packaging tests system.
• Defining the product vision and strategy.
• Prioritizing features based on customer feedback and business impact.
• Creating and managing product roadmaps.
• Work with engineers, customer, cross-functional team and supplier to ensure timely delivery of projects.
• Design ATE hardware, electronic circuit, PCB architecture and layout based on specification and test plan from customer requirement.
• Monitor, evaluate, analyze and optimize test system to ensure optimal manufacturing yield.
• Perform evaluation, research, experiment, prototyping, proof of concept and data analysis to determine cause effect of issue and to provide solution.
• Manage supply chain for standard part purchase, equipment, system and accessories.
• Responsible for overall projects, planning, design, development, buyoff and continuous improvement.
• ATE System Troubleshooting and identify the root cause.

JOB REQUIREMENTS

• PCB design software such as Altium, Cadence, Kicad or equivalent.
• Analog and high-speed digital circuit PCB design.
• PCB troubleshooting and root cause identification for design improvement.
• Knowledge of circuit analysis and electronic design.
• Strong in verbal and written communication skill.
• Ability to collaborate with cross-functional technical teams.
• Good analytical, decision making and problem-solving skills.
• Motivated, growth mindset and with positive attitude.

Mechanical Design Engineer

Job Objectives:

• Provide automated equipment mechanical design from concept to manufacturing.
• Provide technical guidance on the precision parts, motions, structure and thermal management.
• Provide technical guidance on the material selection.

Responsibilities:

• Interact with Marketing to develop specifications for new product development.
• Design and fabricate prototypes i.e. mechanical enclosure and evaluate the performance of the prototype.
• Interact with customers in new product trials.
• Proactive in identifying design and technical challenges in early design stage.
• Create new, innovative and creative idea to solve technical challenges in Analog design

Requirements:

• Possess Degree/Diploma in Mechanical/Mechatronic Engineering or equivalent.
• At least 2 years of working experience, preferably in automated equipment design environment.
• Applicants must be willing to work in Bayan Lepas.
• Preferably applicant specializing in Engineering – Mechanical/Automotive or equivalent.
• Full-Time positions available.

Skill Required:

• Experience in Inventor 3D CAD tool, precision tolerance, motor, cylinder an actuator selection.
• Hands-on experience in assembly, problem analysis and solving.
• Working knowledge in electronics industry.

NPI Engineer

• Maintain accurate BOM and product technical information. 
• Ensure information are up to date and proliferate into relevant department involve. 
• In charge on machine assembly processes, refurbish or retrofit project. 
• Obtain require materials according to BOM. 
• Ensure Production perform assembly process according to manufacturing process instruction (MPI), completed on time and compliance to customer workmanship requirements. 
• Assist customer, superior or quality engineer to perform machine functional test. 
• Perform 5S’s at working area. 

Operations Manager – Medical Device Manufacturing

Key Responsibilities

• Oversee and manage daily manufacturing operations, including production planning, supply chain, procurement, logistics, and facility maintenance.
• Ensure full compliance with ISO 13485, FDA, and international medical device regulations.
• Lead process improvement and lean manufacturing initiatives to increase efficiency, quality, and cost-effectiveness.
• Collaborate with cross-functional departments such as engineering, quality assurance, and regulatory affairs to meet production and compliance goals.
• Manage internal and external audits and ensure accurate and current documentation of operational processes.
• Develop and track OKRs to measure operational effectiveness and identify areas for improvement.
• Lead, coach, and develop operational teams to achieve high performance and foster a culture of accountability and innovation.
• Manage operational budgets and implement cost-saving strategies while maintaining quality and compliance standards.
• Maintain a safe and compliant work environment in accordance with health and environmental regulations.

Requirements

• Bachelor’s degree in Engineering, Operations Management, Manufacturing, or a related field. A Master’s degree is a plus.
• Minimum 5 years of experience in operations management within the medical device manufacturing industry.
• ISO 13485 certification and strong knowledge of medical device quality management systems.
• Experience with FDA, CE Marking, and MDR regulatory frameworks.
• Proven track record of leadership in a manufacturing environment, with hands-on experience in process optimization.
• Strong analytical, organizational, and decision-making skills.
• Proficient with ERP systems and operational reporting tools.

Payroll Executive

Job description

About the role

Pentamaster Corporation Berhad is seeking a talented Payroll Executive to join our team in Bayan Lepas, Penang. 

This is a full-time position that plays a crucial role in ensuring the accurate and timely processing of payroll for our valued employees.

What you’ll be doing

• Manage the full payroll process including calculating salaries, allowances, deductions, and tax payments
• Ensure compliance with all relevant payroll and employment legislation
• Prepare and submit payroll reports and documentation to the relevant authorities
• Assist with payroll-related queries and provide excellent customer service to employees
• Strong attention to detail and accuracy.
  

What we’re looking for

• Minimum 1 years of experience in a payroll or accounting role
• Strong knowledge of payroll regulations, tax laws and compliance requirements
• Proficient in using payroll software and spreadsheet applications
• Excellent attention to detail and numerical accuracy
• Strong communication and interpersonal skills
• Ability to work collaboratively within a team and independently

Process Engineer – Moulding

Job description

About the role
Responsible for the process qualification, yield and manufacturing improvement. 

What you’ll be doing

• Responsible to develop, configure, and optimize manufacturing processes.
• Responsible to develop best practices, routines, and innovative solutions to improve production rates and quality of output.
• Responsible to develop and maintain process documentation and operating instructions for the processes.
• Responsible for risk management evaluation e.g., FMEA
• Responsible for the qualifications for equipment and process (DQ/SAT/IQ/OQ/PQ).
• Ensure all the written procedures and working instructions for assembly and packaging are straightly observed, and all documents must be up to date.
• Ensure workplace are clean and safe to work all the time.
• Perform any other relevant responsibility that may be assigned occasionally as required by management or immediate superior. 

What we’re looking for

Qualifications

• Degree in Science or Engineering, in any discipline.

Experience

• Minimum 2 – 5 years in process engineering, any medical manufacturing environment.
• Familiar with GMP and ISO 13485.

Process Technician – Moulding

Job description

About the role
The injection mould process technician is responsible for all aspects of the injection mould processes including, changing out moulds, completing setups, troubleshooting, operation, and maintenance of injection mould equipment

What you’ll be doing

• Responsible for setup, startup, maintain and repair of injection moulding facilities, such as injection moulding machine, auxiliary equipment, and other moulding related equipment.
• Work with production personnel to ensure moulded parts meet requirements, make adjustment as necessary.
• Perform mould daily/weekly cleaning at machine.
• To ensure production schedules are followed and discuss with production supervisor for changes in schedules.
• Perform immediate corrections (quick fix) to contain the affected products and to eliminate the detected non-conformance. Record the corrections taken into process card.
• Record machine critical parameter each shift.
• Assist process engineer to perform machine and mould validation (IQ, OQ and PQ)
• Initiate TR with adequate details and sends required samples to Quality Control Technician for inspections and releasing of molds according to the required test specification and standard operating procedure.
• Make minor repair or maintenance to machine, tooling, and equipment. Notify proper personnel for necessary major repair.
• Ensure workplace clean and safe to work at all the time.
• Comply with all safety, quality and work rules and regulations.
• Perform any other job or task assigned by immediate Superior or Top Management.

What we’re looking for

Qualifications

• Certificate or higher in mechanical engineering. 
• Candidates with lower education background but with vast experience as a moulding process technician will also be considered.

Experience

• Minimum 2 years of working experience in similar type position in the plastics industry or injection molding process. .
• Experienced in handling hot runner and multi cavity mould will be added advantage.
• Know how to use QC tools will be added advantage.

Production Technician

Responsibilities

• Responsible of checking parts arrival and status using EBS.
• Responsible of drawing out necessary parts needed for project from store and production cabinet (pneumatics fittings, screws etc.)
• In charge and responsible of machine assembly, panels assembly, wiring, pneumatics routing and trunking management.
• Responsible of tool testing and alignment for machine optimum operation.
• Responsible of machine data collection for buy-off or verification purposes as per request by manager.
• Assist project team during project buyoff by customer.
• Actively participate in any assignment given by production management.

Requirements:

• Min SPM/ SKM/ Diploma/ Certificate in Engineering (Electrical/ Electronic/ Mechanical or equivalent qualification.
• Min 1 year of working experience in related field.
• Knowledge / hands-on skill in mechanical or electrical assembly.

Project Engineer

Job Objective:

• Responsible for project coordination activities and execute establish plan.
• Enhance product manufacture process and provide support to operation. Ensure on time delivery and good quality product to customer.
• Manage and maintain product technical information. Ensure information are up to date and proliferate into relevant department involve.
• Provide technical consultancies and support to all relevant parties for potential business and opportunities.

Responsibilities:

• Responsible for coordinating and monitoring assigned project activities or task according to project schedule/ planning.
• Review new product technical information. Any discrepancy or doubt regarding technical information shall perform communication with customer and communicate with related parties to obtain their approval.
• Ensure manufacturing flow is carrying out according to project schedule to prevent unforeseen circumstances.
• Establish product inspection check list, visual and inspection criteria for new product if documents are not applicable by customer.
• Perform data analysis and failure analysis report for customer complaint regarding technical or workmanship issues.
• Follow Pentamaster ISO procedures and requirements. Feedback to superior if procedures are not able to follow or meet work requirements.
• Ensure 5S’s at work areas at all the times able for customer’s spot check / Audit at any time.
• Any others assignment assign by superior from time to time.

Requirements:

• Diploma in Engineering / Mechanical / Electrical & Electronic / Mechatronic / Equivalent.
• Minimum 2 years’ experience.
• Japanese speaking is a MUST
• Must be computer literate; – (Microsoft Word, Excel & PowerPoint)
• Able to perform work independently.
• Must have technical background and knowledge in mechanical.
• Must able to understand mechanical drawing.

QRA / QRA Section Head –
Medical Device

Job description

About the role
Establishing, monitoring and maintaining the quality system implementations in accordance with the ISO 13485:2016, MDA Malaysia, US-FDA QSR, European MDR and related International Medical Device Regulations.

What you’ll be doing

• Responsible to assist in monitoring and tracking of company quality objectives.
• Responsible to manage quality document control system in accordance with the ISO 13485:2016 quality management system, US-FDA QSR, European MDR and related International Medical Device Regulations.
• Responsible to co-ordinate internal audit and conduct process audit in accordance with ISO 13485 quality management system, US-FDA QSR, EU European MDR and related International Medical Device Regulations.
• Responsible to coordinate for in-house preparation prior to external audit by certification body or customers.
• Responsible to manage the entire process of product registration of current and new products with various regulatory bodies.
• Provide regulatory affairs and technical support by working together with marketing, e Research and development, Engineering team on establishing the path of regulatory compliance for new / existing products.
• Prepare training plan for cGMP and GDP training of all employees of the company as well as supervision of the compliance of the standards.
• Responsible to ensure the corrective action replies of all internal and external audits discrepancies was closed effectively.
• Coordinates Change Control process (Document change, design change, production and process change) to ensure appropriate changes and actions are implemented.
• Responsible for the management of Customer Complaint, Corrective Action and Preventive Action (CAPA) investigation as well as Nonconformances (NC) investigation and process activities.
• Maintain Risk Management File and coordinate Risk Analysis with other functions & ensure Risk Analysis has been developed, evaluated and reviewed.
• Corresponded with regulatory authorities regarding planning of registrations, time frames and in case of enquiries.
• Perform any other pertinent responsibility that may be assigned occasionally as required by Top Management or immediate superior.

What we’re looking for

• Minimum six years of professional experience in regulatory affairs or in quality management system relating to medical devices.
• A minimum of six years experience in Medical Device based GMP manufacturing operations.
• Experience working in a GMP, ISO 13485:2016 and related International Medical Device Regulations.
• Experience in the establishment and development of Greenfield sites is an advantage.

Quality Assurance Engineer

RESPONSIBILITIES AND DUTIES

• Ensure that processes and products are verified for conformance to customer requirements and Acceptance Test Plan from IPQC, final check until packing.
• Follow up safety test on machine to ensure compliance to IEC or ISO safety standard.
• Liaise with Project Management team, designer, production and sub-contractors for quality improvements.
• Executing reliability testing activities, for example Burn In test, MTBA, Fault Injection test, Safety test like Temperature Test, Drop Test, Humidity test, Thermal shock and Life test where applicable. 
• Provide support for existing / new Product Realization in term of Production Line & Product Verification & Buyoff and specification/design review, if applicable.
• Work towards achieving the targets as outlined in the current fiscal year business strategy. 
• Validating the implementation of corrective and preventive measures related to customer complaint and follow up 8D report with verify effectiveness. 
• Compiling product inspection data, LAR and GRR data where applicable. 
• Maintaining quality record and statistical performance for individual customer account. 
• Monthly scheduled discussion and presentation, if applicable. 
• He / She shall demonstrate positive attitudes and positive actions through a display of courtesy, congeniality, cooperation, sensitivity and professionalism. 
• Capable to protect the confidentiality of information with areas of own position responsibilities by preventing unauthorized release, both verbal and/or writing. 
• Closely follow up with project team for every project buyoff status.
• Actively participating in 6S implementation within department
• Perform Internal audit for product and process follow ISO 9001 or ISO 13485 requirement and internal procedures.
• Protect the confidentiality of information with areas of own position responsibilities by preventing unauthorized release, both verbal and/ or writing.

RESPONSIBILITIES AND DUTIES

• Diploma or degree holder or equivalent in engineering related field.
• Experience in ISO background, quality controls implementation, monitoring and continuous improvement required. 
• Candidates preferable with manufacturing background. 
• Capable to drive for improvement project.
• Data analyzing technique and root cause findings. 
• Capability to perform statistical process control tools and application. 

Quality Assurance Technician

Job description

Pentamaster Corporation Berhad is seeking a talented QA Technician to join our team in Batu Kawan, Penang. 

What you’ll be doing

• Ensure compliance of product specification and standards. 
• Ensure inspection activities and product quality plan effectively executed. 
• To maintain the quality records prior to inspection.
• To set up the inspection, testing & measuring equipment, jigs and fixtures.
• To carry out QA laboratory testing, work in process and finished good inspection activities as per quality plan, procedure and instruction.
• To perform the First Article Inspection (FAI).
• Generate inspection report after completing inspection task.
• Prepare all relevant documents and data requested by customer and internal cross functional department.
• Ensure that processes and products are verified for conformance to customer requirements and Acceptance Test Plan from IPQC, final check until packing.
• Follow up buy off on machine to ensure compliance to customer, safety and ISO standard.
• Compiling product inspection data, LAR and GRR data where applicable. 
• Maintaining quality record and statistical performance for individual customer account. 
• He / She shall demonstrate positive attitudes and positive actions through a display of courtesy, congeniality, cooperation, sensitivity and professionalism. 
• Capable to protect the confidentiality of information with areas of own position responsibilities by preventing unauthorized release, both verbal and/or writing. 
• Closely follow up with project team for every project buyoff status.
• Actively participating in 6S implementation within department

What we’re looking for

Certificate or Diploma holder or equivalent in engineering related field

At least 1 year working experience in quality field.

QA experience in manufacturing environment.

Knowledge of ISO 9001:2015 is an added advantage.

Computer knowledge in Microsoft office.

Need to round shift 

Quality Control Inspector – Medical Device

Job description

• About the role
  In charge of product inspection based on test specification and test method. Perform inspection for incoming material, in process and outgoing process. 

What you’ll be doing

• Perform inspection at Incoming Quality Control (IQC), In Process Quality Control (IPQC) and Final Release Quality Control (FRQC) as per Drawing, Test Specification and / or Work Instruction.
• Issue Nonconformance report (NCR) to production for nonconformance materials, component and product at IQC, IPQC and FRQC.
• Record inspection result into Inspection Quality record for quality analysis purpose.
• Feedback immediately to respective superior regarding quality problem.
• Maintained the filling of inspection report and cleanliness of QC working area and room.
• Monitor the use of equipment to ensure it is safe and well-maintained and discard any that doesn’t meet requirements.
• Perform any other pertinent responsibility that may be assigned occasionally as required by Top Management or immediate superior.

What we’re looking for

• A minimum of 1 year experience working in Quality Control Department.
• Experience working in Medical Device manufacturing or Pharmaceutical based GMP environment is an advantage.
• Meticulous at world and result oriented.
• Strong organizational skills.
• Hands-on knowledge of computer applications including use of the Internet, Word and Excel applications software such as statistical software.
• Preferably with ability to operate tensile tester equipment & vision measuring system and familiar in handling of measuring equipment.
• Ability to handle multiple tasks and operate ln a fast-paced environment.

Quality Engineering Engineer – Medical Device

Job description

About the role
Establish the development of quality engineering and quality compliance with the right skill sets for new product introductions and product life cycle management.
Implement the strategies for the qualification of the facilities, utilities, equipment, test method and material.

What you’ll be doing

• Assist in all areas of qualification, validation and calibration in alignment with the ISO 13485:2016 quality management system, US-FDA QSR, European MDR and related International Medical Device Regulations.
• Develop Validation Master Plan, impact assessments and validation plans that support the qualification and validation of facilities, utilities, equipment and processes.
• Responsible for QMS activities related to new medical device development or product transfer and ensure adequate controls are in place (e.g. new test methods and test specifications).
• Support Design Qualification (DQ), Installation Qualification (IQ), Operational Qualification (OQ), Performance Qualification (PQ), Test Method Validation (TMV) and Computer Software Validation (CSV).
• Partners with Research Production and material suppliers to ensure appropriate application of process validation, process control, and risk management; and the investigation/correction of process failures when needed.
• Supports new product introduction as part of design transfer and technology transfer activities as required and provide technical assessments on change controls, deviations, and investigations.
• Assist in development of validation strategies for the entire process including risk assessment and test method validation.
• Work with Procurement to maintain and update approved supplier list.
• Work closely with Quality Control team and plan for improvement.
• Re-qualification and re-validation of facilities, utilities, equipment and processes as per the frequency established.
• Responsible in performing quality inspection for product validation and process validation as part of design transfer and technology transfer activities as required.
• Perform any other pertinent responsibility that may be assigned occasionally as required by Top Management or immediate superior.

What we’re looking for

• Candidate must possess an Associate Degree/Degree in Engineering / Manufacturing/Applied Science/Mathematics or equivalent. 
• A minimum of 3 years experience working in validations or medical device product testing or equivalent role in a regulated industry (Pharmaceutical or Medical Device manufacturing).
• Meticulous at work and result oriented.
• Strong organizational skills.
• Hands-on knowledge of computer applications including use of the Internet, Word and Excel applications and presentation software such as Power Point and statistical software.
• Works well in a team-oriented, cross-functional environment.
• Ability to handle multiple tasks and operate in a fast-paced environment.

Service Engineer (Malacca Based)

Job description

Pentamaster Corporation Berhad is seeking a talented Service Technician to join our team in Malacca site. 

Provide enterprise-level support to customers. An ideal technical support engineer/ technician resume should address their ability to research, diagnose, troubleshoot, and resolve the issues to the clients’ satisfaction.

Ensuring all assigned assembly tasks are completed with compliance to quality, schedule and budget requirements within company goals to achieve Total Customer Satisfaction.

MAIN RESPONSIBILITIES AND DUTIES

• Diagnose, troubleshoot, and resolve mechanical and electrical issues by understanding from customers about the issues they are facing in a detailed fashion. 
• In charge and responsible of machine assembly, panels assembly, wiring, pneumatics routing and cable management.
• Consult with vision and automation programmer if there is any issue on programming on the machine at customer place.
• Responsible of tool testing and alignment for machine optimum operation.
• Responsible of machine data collection for buy-off or verification purposes as per request by customer.
• Taking ownership of customer issues reported and seeing problems through to resolution.
• Follow standard procedures for proper escalation of unresolved issues to the appropriate internal teams.
• Provide training to client for new installed equipment and additional request of training from client for their new staff. 
• Ability to self-direct on projects and tasks and the ability to provide prompt and accurate feedback to customers.
• Report project status on timely manner and attend meetings with customers or Pentamaster team if they are required.

JOB REQUIREMENTS

• Diploma or Certificate Mechanical or Electrical Engineering or Mechatronics or Manufacturing or Industrial Technology.
• Minimum 2 years of experience in automation field, able to work independently without any supervision.
• Technical skills in machine mechanical and electrical, working knowledge in machine assembly process.
• Knowledge in reading and interpreting mechanical drawing and electrical schematics. 

Software Engineer

Responsibilities:

• Responsible for system development, testing, debugging, implementation and documentation of business application.
• Developing existing program according to system enhancement request.
• Creating technical specification and test plan.
• Writing operational documentation with technical authors.
• Analyzing user requirement, researching, designing and writing new software program.
• To provide support to existing and new customer on project as and when required.

Requirements:

• Diploma/Advanced Diploma or Degree in Computer Science/Information Technology or equivalent.
• At least 1 year of working experience in the related field is required for this position.
• Fresh graduates are also encouraged to apply.
• Familiar with VB.Net, SQL Server, C#.
• Applicants must be willing to travel & work in Bayan Lepas.
• Preferably Junior Executives specializing in IT/Computer – Software or equivalent.

Sourcing Executive

JOB OBJECTIVE

• The sourcing executive, to source high-quality and cost-efficient supplies for our organization and assist organization in creating strong relationships with suppliers and maintaining the existing ones.
• Sourcing executive will actively analyze and review project costing, sourcing goods, materials, and service at competitive prices, quality then advising upper-level staff members on which supplier to contract with.
  

MAIN RESPONSIBILITIES AND DUTIES

• Involve in the end-to-end sourcing and suppliers contract management process.
• Handle substantial cost savings projects and cost reduction for the organization.
• Solicit, analyze, and compare bids through Request for Proposal (RFP) or Request for Quotation (RFQ) from existing suppliers and new potential suppliers.
• Strategize and negotiate actively with suppliers for the advantageous terms.
• Ensure contracts are fully addressed and appropriate, in terms of the requirements and commercial terms.
• Evaluate sourcing levers for all projects – supply market leverage, supply base restructuring, valuable relationships, design/specification optimization, total cost management, process efficiency & compliance.
• Perform supplier evaluation & selection process to ensure secured quality supplies and cost-efficient for the organization.
• Entry procurement data which related to procurement process in organization’s ERP system.
• Attend events, fairs, and exhibitions to keep abreast of the market’s trends.

JOB REQUIREMENTS

• Minimum SPM, Diploma or Advanced/Higher/Graduate Diploma or Degree in any field or technical field is preferred.
• At least 2 years working in sourcing, purchasing, technical knowledge is preferred.
• Good command of written and verbal English and converse well in Mandarin and Bahasa Malaysia.
• Strong computer application skills in MS Office i.e. Excel and Word.
• Resourceful, possess good negotiation skills and able to work independently with minimal supervision.
• Excellent interpersonal skills with positive attitude, strong analytical/structural skills.

Test Application Engineer

MAIN RESPONSIBILITIES AND DUTIES

• Develop software, modules and test sequence based on specification and test plan from customer requirement.
• Work closely with customer, project team and supplier to ensure timely delivery.
• Monitor, evaluate, analyze and optimize test system to ensure optimal Manufacturing yield.
• Debug/troubleshoot ATE failure and provide corrective action after completion of failure analysis.
• Perform evaluation, research, experiment, prototyping, proof of concept and data analysis to determine cause effect of issue and to provide solution.
• Responsible for overall projects, planning, design, development, buyoff and continuous improvement.

JOB REQUIREMENTS

• Bachelor or Master Degree, Post Graduate Diploma, Professional Degree in Electrical and Electronics Engineering, Computer Engineering, Computer Science or equivalent.
• LabVIEW, TestStand or C++ language.
• Lab equipment such as oscilloscope, DMM, function generator etc.
• 3-5 years of working experience in related field, fresh graduate is  encouraged to apply.

Warehouse Store Coordinator

• To perform the warehouse activities
• To perform the inventory count, receiving, submit documents to finance and doc-con, handle vendor on-loan, put away, storage, picking, break bulk issuing, return, completion of JO, location transfer, inter-co transfer, adjustment, and system update.
• To prepare and update reports on time and accurately.
• To ensure on time updating.
• Ensure KPI and CIP achieve on time.
• Ensure perform the task appropriately and fulfill the audit requirement.
• Job to be assigned by superior from time to time.